- PrintableYes
- Works onPC, MacBooks, Tablets, iPhone, iPad, Android phones, laptops.
- SoftwareWe recommend Sumatra PDF as PDF reader
2018 Ford Taurus repair manual
$69.99
- Do the labor yourself. On most repairs the shop’s labor costs more than the parts. With the factory procedure you can do that part yourself.
- Built for your VIN. Your engine, transmission and options, so you don’t have to guess which section applies.
- Factory steps, specs and wiring. Repair procedures with illustrations, torque values and the complete wiring diagrams.
- Find any job in seconds. Searchable PDF with a full index and bookmarks.
- In your inbox in 12–24 hours. Yours to keep, on any computer, phone or tablet.
Description
2018 Ford Taurus OEM service and repair manual – VIN-specific PDF
The 2018 Ford Taurus factory repair manual, made for your VIN from Ford's factory service data: removal and installation steps, torque values, diagnostics and wiring diagrams for your exact Taurus. The 2018 Taurus was offered with four engines and two transmissions (listed below); the manual you get is for the combination in your VIN.
The Google Top Quality Store badge, without a subscription. Pay once for this manual; there is no monthly fee and nothing to cancel later.
What you get with this manual
- Factory information, not an aftermarket book: the same Ford procedures and specifications dealer technicians use
- Built for your VIN: only the engine, gearbox and options your Taurus actually has
- Yours to keep: pay once and the PDF stays with you
- Clickable hyperlinks throughout the PDF: from a repair step straight to the diagram or torque table it mentions, with bookmarks and full-text search on top. Few manuals sold online have this
- Wiring included: diagrams, connector pinouts and component locations
- Works on any device, offline, and prints page by page for the garage
Not the owner's manual
Many people search for the 2018 Taurus owner's manual and need more than it gives. The difference:
- Owner's manual: controls, warning lights, maintenance schedule, fluid types
- Factory repair manual: removal and installation steps, torque specs, diagnostic trouble codes, wiring diagrams and component locations
Model year 2018 is part of the sixth-generation Taurus (2010–2019). Years of the same generation share most procedures; equipment and electrical details still change from year to year, so the manual follows your VIN.
Engines offered
- 3.5L Ti-VCT
- 3.5L GTDI
- 2.0L GTDI
- 3.7L Ti-VCT
Gearbox options
- Automatic Transmission — 6F50/6F55
- Automatic Transaxle/Transmission — 6F35
Not sure which version you have? You don't need to know: the VIN tells us, and the manual is built for it.
Typical repairs for a 2018 Taurus
- Battery, starter and charging faults
- Sensor faults: oxygen, ABS wheel speed, mass air flow
- Door lock actuators and window regulators
- Brake pads, rotors and calipers
- Suspension links, bushings and wheel bearings
What NHTSA records show for the 2018 Taurus
The U.S. safety agency NHTSA lists 4 safety recalls and 52 owner complaints for the 2018 Taurus. When a part on this list fails out of warranty, the manual shows how to test and replace it.
- Electrical System: Ignition (campaign 18V141000)
- Suspension: Rear (campaign 20V072000)
- Structure: Exterior Trim (campaign 25V611000)
- Back Over Prevention: Camera (campaign 25V695000)
Most owner complaints concern: Back Over Prevention (15), Structure (11), Unknown or Other (8), Suspension (7), Power Train (7).
Check your VIN: the 10th character is “J” on a 2018 model.
Other years of the same generation: 2010 Taurus, 2011 Taurus, 2012 Taurus, 2013 Taurus, 2014 Taurus, 2015 Taurus, 2016 Taurus, 2017 Taurus, 2019 Taurus.
Other Ford manuals: 2021 Bronco Sport, 2018 F53, 2018 F59, 2007 Five Hundred, 2026 Mustang GTD, 2005 Thunderbird, 2018 Expedition, 2020 Fusion Hybrid/PHEV, 2018 Transit Connect, 2025 F53 Motorhome Chassis.
Made to order, not a generic download. We start from your VIN, collect the Ford procedures and diagrams that apply to it and send you the PDF within 12–24 hours.
Sections of the 2018 Taurus service manual
- Fuse and Relay Information
- Charging System
- Power Distribution
- Module Communications Network
- Electronic Engine Controls
- Transmission Controls
- Auto-Start-Stop System
- Cluster and Panel Illumination
- Headlight wire harness
- Automatic Climate Control System
- Vehicle Dynamic Suspension
- Two-Wheel Drive/Four-Wheel Drive Systems
- Alignment: The alignment should be checked every 12,000–15,000 miles
- Engine oil pan gasket leaks
- Engine bucking and misfiring at freeway speeds
- Engine stalling or hesitation upon acceleration
- Problem with idle air bypass valve
- Camshaft sensor magnet damaging synchronizers
- Cracked windshield
- Gasket leaks
- Automatic lights not working
- White smoke caused from exhaust due to a blown or cracked head gasket
- Rear suspension toe links fractured due to stress
- Battery: A weak or dead battery
- Alternator: A broken alternator
- Starter: A failed starter
- Fuel system: Fuel system complications
- Electrical: Electrical or wiring complications
- Seized engine: A seized engine
- Starter relay: A starter relay failure
- Control module: A control module does not initiate the start
- Battery cables: Loose or corroded connection cables
- Solenoid: A solenoid
- Fuel pump: A fuel pump
Versions offered
Engines covered in 2018 Ford Taurus repair manuals:
- Engine — 3.5L Ti-VCT
- Engine — 3.5L GTDI
- Engine — 2.0L GTDI
- Engine — 3.7L Ti-VCT
Transmissions covered by 2018 Ford Taurus service manual:
- Automatic Transmission — 6F50/6F55
- Automatic Transaxle/Transmission — 6F35
Your manual is built for the version in your VIN.
Video
Delivery
Free, by email in 12-24 hours.
